A&Q about lavatory bowl from yahoo

Q:Do you ever feel like a used tea bag dunked into the lavatory bowl of life?

A:If you're dunking your tea-bags into the toilet pan before use then you got a serious issue with tea-bags. Just what have tea-bag done to you in your past that makes you hate them so much and another thing How does the tea taste.

A:I feel like a drowned rat, actually!! Ive just come in from the p i s s down of rain outside. One second of sun and the next minute its like someone has thrown a bucket of water out of the pi ss ing window!!!! IM SOAKING!

Erm...dunked teabag? No not so much!

Q:Ladies. I had a new lavatory a month ago. I flush it once a day but the bowl is now as brown as the old one...

...do you think I should contact the Water Authority over obvious water quality problem ?

A:why dont you just clean it make sure your using lots of bleach and get one of those blue waterthings to go in the tank makes the water come out blue and you dont see the discolourment.also ask your neighbours if they suffer with the same problem maybe they'll be able to help give you solutions... :)

A:You need to scrub it with the brush everytime you flush. The brown discoloration is the waste matter combined with the chemicals in the water. If you brush everyday there won't be any chance for it to build up and discolor your bowl.

A:It can also be your pipes.

Q:

I need a lavatory alone, where can i purchase one without buying a set (lavatory bowl and lavatory set)?

A:Home Depot, Lowes Menards, any plumbing supply. Most toilets are available as separate tank and bowl. But I wouldn't count on an odd tank fitting an unrelated bowl.

A&Q about squatting pan from yahoo

Q：Isn't a squatting pan thats used in the East for passing out waste matter more hygienic than the toilet seat?

In a squatting pan there is no physical contact between the person and the toilet so chances of getting some disease from a used toilet seat seem more reomote. Your views.

A：depending on the width of the pan it cold make contact with your ankles. People with poor balance could fall in it and If you were at the wrong angle you'd end up peeing on yourself. Just use cleaners on toilet seats. Your kitchen table has more germs on it anyway.

A：Um no... you do realize that over there people dont even use toilet paper? They wipe with their hand and rinse it off with water... no soap...just water.

Just buy some sanitizing wipes and wipe down the toilet seat before hand and then lay toilet paper on top of it.
You are more likely to get sick from touching your own poo than from sitting on a toilet seat.

Q：Talking about "toilet business", why the westerners ladies do not use squatting pan?

To them is like a "unbelievable" thing....I wasnt knew that until I work in a environment where I can meet a lot of foreigners.

A：When I traveled to Japan, it was my favorite thing to encounter at public restrooms! It's so much easier than using a seat cover! Brilliant! I don't understand why it hasn't caught on either.

A：We usually only squat if we're in a public restroom and don't want to get crabs.

Did you hear about the lady in the United States who got arrested for shouting toilet obscenities? She was fined for potty mouth! I'm not kidding...the link is below! Craziest story I've ever heard!

Q：Can you successfully negotiate a squatting pan?

Well for peeing- that's easy.
But for the other big job, well- I fret about soiling my shoes inadvertently.
What's the secret to successful squat pan operation?

A：Honey, all I can say to that after researching what a squat pan is....is that "THANK GOD I AM AN AMERICAN"! I have never even heard of one until I read your question. Good luck to you.

A：Congratulations! You have won the award for asking the most stupid question ever asked on Yahoo Answers, troll!

A&Q about water bath trough from yahoo

Q:Bath tub for water bath trough with stains?

I have an old bath tub that has been sitting outside for like a long time (ma by 2 years). It had an old childs chair that was metal, and so it got all rusty from the bath tub being filled with water for the raine. The other day I scrubbed it out with watered downed bleach, and rinsed it really good. there's still golden spots (there not actualy rust I don't think, they just seem to be stained i think) on the bottom from where the chair was, it wont come off! ive tried everything ive scrubbed it with steel wool and tons of other things. Will it be ok for my horses to drink out of it anyways? Or will it not be good for them?

A:Even if it has rust in it it will be fine.

Rust doesn't hurt you if you drink it nor does it hurt horses. You wouldn't want to drink the muddy red stuff in the bottom of a rusty tank but the amount of rust that comes off a spot in a bathtub is negligible.
Make sure that tub is rinsed thoroughly , the chemical residue from cleaning stuff is way more dangerous than rust.
I am wondering how you are going to plug the tub .. make sure you can take the plug out now and then to clean out the algae that may form. When you see green in the tub it's time to clean it soon.

A:I agree with Wheeldog but you also want to take the chain off the plug - I knew someone who's horse seemed to think it was a new toy - drove her nuts wondering where all the water was going until she caught him doing it !

Also you want to take the taps off to avoid possible injuries from them.

Q:I am a pig farmer. How am I going to take January's bath now that the water bath trough have frozen over?

A:leave it till next year,i'm sure no one will notice.

A:It's too cold to bath .Go back to bed and poke the wife.You know you love those tenderloins.

Q:Horse's water bath trough?

I'm sick of lugging small water buckets a day to the back field for my horse since his water trough broke in the wind (it was a hardened plastic 40 gallon one but still broke in strong winds) :-[ Anyway, now I'm stuck without a water trough so I'm having to cart water into those 5 gallon TubTrug thingies. Where can I get a cast iron bath or a big water trough for free/cheap near me in the North East UK? Any ideas of anything I can use other than what I've mentioned? Thanks!!

A:Try TSC if they have one where you live. Or if they have a True Value where you live. Or a Southern States if they have them where you live! These are all great stores that have exactly what you need!

A:HIYA I WOULD HAVE SAID FREECLYCLE UT THEIR IS NO POINT REAPETING IT.

BUT I HAD THE SAME PROBLEM BUT LUCKILY MY MATE OWNS A DUMP YARD AND HE FOUND ME A GIANT BIG I DUNOO TUB THING AND I USE THAT, IT HOLDS LIKE 100LITRES!

A&Q about stall urinal from yahoo

Q:How do you determine which stall urinal you use?

I usually use the one on the end, but not the handicaped one (those are a bit big for my fancy).

A:The cleanest one and if I'm at school, the one with a door that actually locks.

A:the handicapped one because its usually the cleanest and its wider....I dont like tight spaces so much! .....also the toilet is a little higher and that works better for me since Im tall.......

Q:What would you do if you were at a stall urinal and a man looks over and compliments your sizeable member?

A:I would say thank you and tell him that my Glock is much bigger that i mainly use it for blowing away peter puffers that stare at my junk.

A:Take out my machetee and chop hees pisstolero to peeses, si. Eez too many sss, si.

Q:What would you do if you left the stall urinal and the guy next to you complimented you on your large member?

A:thats y i avoid urnials at all cost. even if i go in and im alone screw that someone could just come in and peek at my baby maker :(

Enjoy the rest of ur nite and have a great wkend :)

A:*lol* this question is interesting. i keep thinking of the doctor a long time back that told me my underwear/bra set looked great on me. it was creepy. *lol* if i was a guy i'd be creeped out for sure.

Q:Why is there a rubber in the stall urinal?

you know what I'm talking about ?
see the rubbers in here?
women, don't answer u have never seen this!

A:Due to juvenile behavior.

water bath trough

water bath trough is a pipe device for use in bath or shower, the bathroom is usually installed in homes. Modern mostly acrylic bathtub (acrylic) or glass fiber, ceramics have to wrap the steel, and even wood manufacturing. Old West Bath is usually rust-treated (galvanized) steel or iron manufacturing. Traditional Japanese-style baths Zeyi timber manufacturing. All along, most of all is a rectangular tub, heating system in recent years, acrylic bathtub because the increasing popularity of the first appearance of a variety of different shapes in the bathtub. Bath of the most common color is white, there are other colors such as pink, etc.. Most water bath to the bottom of Jieyou also prevent overflows in the upper to go with the water level. Some put the location of water pipes installed in the tub edge.

Optional bathtub several aspects should be considered

(A) of the styles and materials



water bath trough

1, in addition to the traditional bath in addition, that many students will choose a jacuzzi.Jacuzzi whirlpool points, bubble, bubble with spiral-type three, the time of purchase should be clear;
2, the material mainly in acrylic bathtub, steel, cast iron products for the mainstream, which cast the highest level, followed by acrylic and steel, ceramic bath as the absolute mainstream of the past, and now the market has almost not visible ;
3, the bathtub is mainly to see the merits of the material surface is smooth, hand touch is smooth. Especially for steel and cast iron bathtub, if enamel coated well, the surface will appear slightly corrugated;
4, material related to the quality and thickness of the water bath trough the strong degree, the students use the visual is not apparent. Need by hand, with the foot again, if sinking feeling, that hardness is not enough. Of course, the step before the best businesses gain consent.
(B) the size and shape
1, the size of a bathtub according to the size of the bathroom to determine, if it is determined the bathtub installed in the corner, usually speaking, the triangular bath tub more than the rectangular space;
2, the same size bathtub, its depth, width, length and profile are not the same, if you like depth point, the location of the waste exports will be higher;
3, there is one side skirts for bath, drain according to the time of purchase, the location of the wall skirts the direction of attention, can not buy the wrong installation.
4, if the water bath trough may have to be added, then shower, tub to choose slightly wider point, shower baths part of the location of the following should be even, and should be handled through the slip.

stall urinal

For men, usually in public toilets in the men's room can be seen.
Male users often use a stall urinal for voiding. However, occasionally someone will spit the urinal, throwing cigarette butts.
Urinal, it is often placed by the administrator: camphor ball (except for the smell of smoke), or aromatic ball (either sucked the smell, but also a sweet!).

Red gate stall urinal installation height
About 1.8 meters off the ground, I said that with the height of the water tank. Tube 2 m PVC50 buy next, buy 4 PVC45 degree bend. stall urinal is about the width of about 30 cm, 20 cm from the ground, the construction of a urinal to make a slope, water can quickly flow away.

Or use the crowd to see the body height, the general public toilets to 100cm. To the level of human standing arm, forearm and the vertical distance from the ground is appropriate. If a family for personal use, some of the kids would be considered 80cm or 60cm.

squatting pan

Device when the toilet is used to obtain the body characterized by squat toilet. squatting pan is divided into non-blocking and block; Pissing structure and non-return of water back to water bend bend.

Pissing Product Guide

First, the selection of points
1 Product Definition
Made of clay or other inorganic


Tank Pissing
Material by mixing, molding, made of high-temperature firing, water absorption ≤ 0.5% of the glazed ceramic squatting pan.
2 Products
2.1 divided by type: hang box, flush valve type.
2.2 divided by water: ordinary type, water-saving.
2.3 use is divided into: adult, child care type.
3 Specifications
Recommended size 3.1
1) Adult: length 610mm, width 270mm;
2) child care type: Long 480mm, width 220mm;
3.2 The wall of the intake center to complete the distance: not less than 60mm.
Any part of the green body thickness of 3.3 should be not less than 6mm.
3.4 All sanitary ware with integral trap water seal depth of not less than 50mm.
4 Scope
For public buildings bathroom.
5 Implementation of the standards
5.1 Product Standards
GB 6952-2005 "sanitary ware"
5.2 Certification Standards
HJ/T296-2006 "technical requirements for environmental labeling products, sanitary ware"
6 Technical Requirements
6.1 The main physical and mechanical properties should be consistent with the provisions of Table 6.1-1.
Table 6.1-1 ceramic squatting pan the main physical and mechanical properties

Index name required
Water absorption (%) ≤ 0.5
Water seal depth (mm) ≮ 50
Average water consumption (L) 11 ordinary type
Saving 8
According to index the radioactive IRa ≯ 0.9
Ir ≯ 1.2 according to index outside the
After each wash washing function may not have residual traces of ink lines.
6.2 Appearance
1) The glazed, the maximum allowable range of cosmetic defects, the maximum allowable deformation, size tolerances, dimensions, etc., should be consistent with the provisions of GB 6952.
2) a product or package should be no obvious color difference between the products.
3) The test should be unglazed crack crack, crack-free billet.
6.3 water
Shall comply with the provisions of Table 6.3-1, squatting pan in any test pressure, the maximum amount of water shall not exceed the specified value 1.5L. Double file Toilet displacement of small files no larger than 70% displacement of large files.
Table 6.3-1 toilet water
squatting pan
Form of the specified value type toilet water
(L) 11 ordinary type
Saving 8
6.4 bidets
Wash function should meet the emission function and the splash of the requirements of pollution.
6.5 Technical requirements for supporting the toilet
1) flushing equipment and supporting facilities of the
Toilet must be equipped with the necessary functional requirements and satisfy the provisions of the quantitative toilet flushing device, and should ensure that its overall tightness, by supporting anti-siphon flush device should be functional.
2) Connect the sealing requirements
Water supply and drainage systems products and the connection between the installation, the hydrostatic pressure of not less than 0.10MPa to maintain 15min no leakage.
Technical Requirement 6.6
1) high-grade sanitary ceramics used in construction shall comply with HBC16-2003 "Technical Requirement for environmental labeling products - sanitary ceramics" requirement, the radioactivity is less than 0.7 according to index, radioactivity outside not more than 1.0 according to index; the product is not the average water absorptionmore than 0.5%.
2) mid-range should be selected in line with building and sanitary ceramics products HBC16-2003.
7 reference price (see Table 7-1)
Table 7-1

Toilet type of mid-range low-grade
Pissing (million) brought back to the water bending 60 ~ 200 200 ~ 580
Back to the water without bending 100 ~ 360 30 ~ 100
Note: 1. The above prices, including water tank, radiator caps, tank fittings, sitting circle, cover. Not included in the price of luxury bathroom products.
2. The table for the market price, and the actual transaction has some float. The same manufacturer's products, because models of different prices vary considerably. Listed products are mainly white glaze.
8 points of the design selection
8.1 Note the depth of water seal
Sanitary water seal every foul is a health requirement. Sanitary ware sets new standards in the "health for all with the overall trap seal depth of not less than ceramic 50mm", including the requirement of the squatting pan with integral trap. Pissing required before the depth of water seal only 30mm, when used in particular should pay attention to.
8.2 The use of water-saving products
1) In new residential cities, by prohibiting the use of a wash water in the 9L or more (excluding 9L) of the toilet.
2) squatting pan washing water standards is not greater than the ordinary type 11L, saving no more than 8L, are mostly water-squatting pan water comes back to turn the product. Water-saving products also have a qualified cleaning functions, features and splash contamination of the discharge. With the realization of the high water tank accessories, but also by infrared sensors, automatic water flushing.
9 trends
9.1 Water
9.2 Green
"Green building and sanitary ceramics" refers to the raw materials, product manufacture, use or recycling and waste treatment and other aspects of the load on the Earth's environment is conducive to small and human health, building and sanitary ceramics. All through the environmental product certification, affixed with ten rings green building and sanitary ceramics products, when the subject should be preferred.
9.3 clean
1) Self-cleaning high smooth the glaze to glaze, or coating with nano-materials to form a hydrophobic surface layer, so that the products are self-cleaning function of the surface, not linked to water, not linked to pollution, scaling, health performance improvement.
2) Antimicrobial products: Health enamel and silver, titanium dioxide and other materials, to kill germs or bacteria under photocatalytic can avoid the surface of bacteria or mildew, improve sexual health.

Pissing optional five steps

From the health


Pissing
Point of view, the main bathroom generally use the toilet, squat pan is generally used guest bathroom, large family bathroom can also select men's urinal, so that both beneficial to clean, but also save water.
Should pay attention to the market selection of five steps: look, touch, weigh, ratio, test
First, look at the overall
Well-known store has its own characteristics, with a model, to prove their strength, placed in a variety of qualifications more obvious location. Whether the sample was placed in neat, attractive, from the manufacturers which reflects the importance of their brand and the intention level.
Second, the touch surface
Pissing the surface of glazed high-end and green body are more delicate, hand-touch surfaces will not have uneven feeling.
Comparison of middle and low dark glazed Squat Pan, in the light irradiation, will find that there are pores, glazed, and green body are relatively rough.
Third, weigh component
High-grade sanitary ceramics squatting pan must be used in high temperature ceramics, the ceramic sintering temperature above 1200 ℃, material structure, completed the Phase Transformation, was the ultimate in close formation and structure of glass phase, reaching the sanitary requirements of all-ceramic hand weigh a heavy feeling.
In both low-end of the squatting pan is used in sanitary ceramics, the low-temperature ceramics, both ceramic because of its low firing temperature, firing time is short, can not complete the phase transformation, thus not reach the full porcelain requirements.
Fourth, water absorption than
In high-temperature ceramics and low temperature ceramic most obvious difference is that water absorption, high temperature ceramics less than 0.2% water absorption, the product easy to clean and not absorb odors, does not occur glaze cracking and partial leaking.
, The low-temperature ceramic water absorption is much higher than the standard and easily into the water and difficult to clean but also gives off an unpleasant odor, and over time will be cracked and leaking.
Fifth, try flushing
The squatting pan, the main function is to flush, and squatting pan pipe design is scientific and rational, the biggest factor affecting the flush.

Steam bath

Steam bath is a late 20th century early 21st century the most popular kind of nursing around the world have different names in different forms and steam bath method, the common characteristics of the object is to heat water, the formation of water vapor at high temperatures were on skin clean and care methods. Due to the geographical position, the different cultural environment, to form a wide variety of steam bath methods, such as traditional Chinese herbal medicine in ancient China, there fumigation treatment for the disease, the Minorities still steamed soil Tu, Yao Yao steamed, steamed Tibetan Tibetan, modern public bath with sauna steam bath and so on.

The type of steam bath
Dry hot steam bath, Finnish bath, such as the Roman bath, bathroom high temperatures, reaching 80 ℃ ~ 110 ℃, relative humidity low, about 20% to 40%.
Hot and humid steam bath bath temperature 40 ℃ ~ 50 ℃, relative humidity is high, even up to 100%, Russian bath, the Japanese bath is the type.

Steam General
1. Steam bath is a systemic diathermy, can promote blood circulation and metabolism, increasing blood flow, reduce blood fat and cholesterol, restore the body's normal physiological function.
2. Steam bath effect, stimulating blood leukocytosis made to enhance human immunity.
3. In vitro temperature changes, gains in the expansion and contraction of blood vessels, can prevent atherosclerosis.
4. Steam fumigation process, the body of excess water and harmful substances are unnecessary drain excess fat is broken down and consumed. Epidermal cells of the newborn is also beneficial to remove loose skin, played the role of diet fit.
5. With a different drug, therapy or adjuvant therapy for different diseases.
Bath Body Method
Implementation of methods and procedures and general bath is different from its unique style. Divided into the following steps:
(A) Preparation
Who entered the strip for bath shower with warm water, soap, body wash and dry or hot air dryer.
(B) of the bathing
Into the steam room, according to personal physical and tolerance, in the bathroom walls of different heights Mucha board supine or seated, constantly changing position can be heated at a uniform, but also after the soft tapping of sticks burning the body to produce mechanical stimulation and the surrounding air flow. Lasted 7 to 15 minutes.
(C) cooling
Until after the body heat, out of the steam room, into the cool room, with 14 ℃ ~ 20 ℃ cold water shower or soak 2 to 3 minutes, can also be used in the outdoor cold air cooling, or swimming in rivers and lakes.
(D) repeatedly
After a certain period of time after the cooling bath, feeling the cold when there is not yet dry off, rest for 10 minutes, then into the steam room, stay for some time, and left the steam room temperature. Is repeated up, cool down 2 to 5 times.

Helsinki rescue unit H15.jpg

n this picture, rescue unit H15 is approaching to assist in a large fire in Helsinki (picture captured from a video tape taken by P?ll? in May, 2006). Behind the unit H15 the engine 31 follows. In addition, two police cars can be seen in the picture and a corner of mobile command center between the units H15 and H31.
A heavy rescue squad (or vehicle/unit) assists in various technical rescue missions (traffic accidents, accidents) - and often in fires. A strict borderline between a heavy rescue unit and an engine doesn’t exist.
An engine can sometimes carry plenty of equipment for technical rescue. However, in a rescue unit the variety of equipment is typically larger – and part of the equipment much heavier, suitable to assist not in just serious car, but metro, or train accidents. In some countries both engines and trucks are often real multi-purpose units capable to work in various kinds of accidents, fires, and medical tasks.
In Helsinki there are two rescue units specialized in technical rescues. The rescue units can operate independently in smaller missions and as a part of larger operations. They can also support engines and aerials in fires, and their equipment is very suitable for working on roofs.
The sister unit of H15 is H25, which operates also as a rescue diver’s unit, occupies marine station (where are a high-speed boat and a larger rescue vessel) when necessary, and works as a first response unit. The 4x4 rescue units in Helsinki are typically occupied by a unit leader, driver/engineer, and 1 – 2 pairs of fire-fighters. The units are occupied by professionals for 7 days in a week, 24 hours in a day.
The unit number H15 stands for H = Helsinki, 1 = station number (central or 1st station; 2 is for the 2nd station), 5 = type of unit (rescue). The other unit in the picture - H31, comes from station 3 (Haaga) and is a fire engine (1 = type of unit, engine). The unit H15 runned more than 1750 tasks in 2005 [1]. Typically firefighters work both in a rescue unit and in an ambulance. The rotation may take place even during the shift.
A trend-setting list of equipment in a rescue unit follows:
Communications:
- vehicle mounted radio/status equipment (using encrypted TETRA-network; status, location)
- handheld radios (EX-type; underground use in tunnels/subway)
- mobile phone system, telephone cables
- mobile data terminal
Dangerous goods:
- handbooks on dangerous goods
- absorbing materials (rolls etc.), oil absorbing material, saw dust
- containers, buckets, wedges
- various pneumatic leak sealing bags with regulators, high pressure air hoses
- sealing taps, plugs, plastics, wedges, wax, plastic bags, chemical containers
- portable radiation meter, multi gas detection sensors, combustible gas sensor, etc.
- chemical protection suits, boots, gloves, chemical diving air apparata and masks, etc.
- small cleaning station for field conditions: showers, detergents, etc.
- glowsticks (chemical lights), duct tape, gas tape, barrier line tape, etc.
Electricity & lighting:
- (built-in) aggregate (55 kW in H25), various kind of floodlights, luminescent lights
- various kind of electric cables, earthing equipment etc.
- reversers, couplers, current reducers, adaptors, voltmeter etc.
Fire fighting and smoke diving:
- handheld fire extinguishers (carbon dioxide, dry powder), bucket fire extinguisher
- fire blanket, fire protection gloves
- extension ladder
- compressed air apparata for smoke diving, masks, regulators, dividers etc.
- smoke diving monitoring chart, several additional air containers
- hand torches, chargers, searching light, floodlights, radios for smoke diving
- smoke diving ropes, hose brackets, sport drinks, water
- ventilator (or a turbo fan; for over-pressurizing an area/building) with accessories
First aid & first response
- monitoring defibrillator, razorblade, cloth scissors
- oxygen container, regulator, oxygen masks, suction unit
- breathing mouthpiece, bag resuscitator with reservoir bag, various masks
- laryngoscope with light and various blades, various endotracheal tubes, Magill’s forceps
- vacuum mattress, vacuum splints, pump for vacuum splints, blanket
- stretcher, backboard, scoopsaver
- blood glucose tester, blood pressure meter, stethoscope
- penlight, tapes, various kind of bandages, binders, tapes, gauzes, trigonum
- sick report blankets
- infusion lines, infusion liquids, glucose liquid, sodium bicarbonate solution
- canules, stasis etc.
- acetylsalicylic acid, active carbon, isosorbide nitrate
High places & roofs:
- carabiners, ropes, knives, descenders, rescue harnesses, rope clamps
- pulleys, belay device, gear slings, etc.
- rescue cushion
Rescue diving:
- light and heavy underclothes, diving suits, SCUBA apparata, full-face diving masks, fins
- knives, weight belts, depth meters, diving computers, diving rope reels, diving compasses
- ultrasonic diving phones, diving phones, phone cables
- buoyancy vests, torches, safety ropes, hauling sack
- submersible welding equipment, welding mask for diver
- surface air equipment, air hoses etc.
- binoculars, life jackets, life ring, rescue board, ropes, ladders
Routing:
- digital map system, digital driving/navigation system
- handheld maps, special maps for underground tunnels, map of hydrants etc.
- handbooks of fire detectors, charts of various buildings and sites etc.
Tools:
- Universal keys and tools for elevators, fire detectors, fire hydrants
- keys and tools for windows, natural gas lines, gas bottles etc.
- various tools and drills for breaking locks and doors
- various general tools: screwdrivers, various kind of gavels, nails, iron wire
- combined pliers, adjustable wrenches, plate shears, open-end wrenches, socket wrenches
- pipe tongs, power tongs, saw, metal saw, hex wrenches, torx drivers, cutting pliers, etc.
- chain saws, spare chaings & Chainsaw spare parts, gasoline, logger’s helmet, breaking bar & impact bar
- electric chain saw, chipping hammer, drills, cable ties, nails, iron wires
- angle grinders, clearing saw, paving breaker, nailgun
- ice auger, ice saw, strainer, hammers, shovel, crow bar, iron bars, axes, street brushes, swab
- measuring tape, duct tape, plastic bags, wedges, spray paint for marking, marking chalks
- goggles, hearing protectors, gauntlets, dust filter masks, chemical protection masks
- various kinds of submersible pumps, hoses
- starting cables
Traffic accidents & rescue:
- high visibility traffic reflecting vests, traffic cones
- air compressor and hydraulic pump units, high pressure air hoses
- pressurized air tools: drills, air pistol, tire filling nozzles
- various types of pneumatic lifting bags
- various hydraulic cutters, several rescue chain packages
- various types of heavy hydraulic spreaders
- several telescopic ram spreaders, hydraulic jacks etc.
- pressurized air container, regulators
- air bag protection package, stabilization blocks, struts
- earthing tools for subway, electric train & tram etc. systems
- traffic sign "road closed", warning triangle, barrier tape
- (a heavy built-in) winch, pulley blocks, shackles, belts, straps, various types of slings, ratches, tackles
- a self-contained ultra-thermal cutting pack (oxygen, regulator, cables, rods, etc.)
- protective gloves, welding mask, etc.
Various:
- multipurpose cart
- box for animal transportation, net, etc.
- timber
- overalls, spare boots, etc.
General information on the Finnish rescue units can be found in Finnish, for example, at the homepages of Helsinki Rescue Department[2] and the Ministry of Interiors[3].
In 2007, the truck in the picture was replaced with a newer one shown in picture [1]. The equipment in the rescue unit has been slightly changed.Chainsaw spare parts.

Helsinki rescue unit H15.jpg

n this picture, rescue unit H15 is approaching to assist in a large fire in Helsinki (picture captured from a video tape taken by P?ll? in May, 2006). Behind the unit H15 the engine 31 follows. In addition, two police cars can be seen in the picture and a corner of mobile command center between the units H15 and H31.
A heavy rescue squad (or vehicle/unit) assists in various technical rescue missions (traffic accidents, accidents) - and often in fires. A strict borderline between a heavy rescue unit and an engine doesn’t exist.
An engine can sometimes carry plenty of equipment for technical rescue. However, in a rescue unit the variety of equipment is typically larger – and part of the equipment much heavier, suitable to assist not in just serious car, but metro, or train accidents. In some countries both engines and trucks are often real multi-purpose units capable to work in various kinds of accidents, fires, and medical tasks.
In Helsinki there are two rescue units specialized in technical rescues. The rescue units can operate independently in smaller missions and as a part of larger operations. They can also support engines and aerials in fires, and their equipment is very suitable for working on roofs.
The sister unit of H15 is H25, which operates also as a rescue diver’s unit, occupies marine station (where are a high-speed boat and a larger rescue vessel) when necessary, and works as a first response unit. The 4x4 rescue units in Helsinki are typically occupied by a unit leader, driver/engineer, and 1 – 2 pairs of fire-fighters. The units are occupied by professionals for 7 days in a week, 24 hours in a day.
The unit number H15 stands for H = Helsinki, 1 = station number (central or 1st station; 2 is for the 2nd station), 5 = type of unit (rescue). The other unit in the picture - H31, comes from station 3 (Haaga) and is a fire engine (1 = type of unit, engine). The unit H15 runned more than 1750 tasks in 2005 [1]. Typically firefighters work both in a rescue unit and in an ambulance. The rotation may take place even during the shift.
A trend-setting list of equipment in a rescue unit follows:
Communications:
- vehicle mounted radio/status equipment (using encrypted TETRA-network; status, location)
- handheld radios (EX-type; underground use in tunnels/subway)
- mobile phone system, telephone cables
- mobile data terminal
Dangerous goods:
- handbooks on dangerous goods
- absorbing materials (rolls etc.), oil absorbing material, saw dust
- containers, buckets, wedges
- various pneumatic leak sealing bags with regulators, high pressure air hoses
- sealing taps, plugs, plastics, wedges, wax, plastic bags, chemical containers
- portable radiation meter, multi gas detection sensors, combustible gas sensor, etc.
- chemical protection suits, boots, gloves, chemical diving air apparata and masks, etc.
- small cleaning station for field conditions: showers, detergents, etc.
- glowsticks (chemical lights), duct tape, gas tape, barrier line tape, etc.
Electricity & lighting:
- (built-in) aggregate (55 kW in H25), various kind of floodlights, luminescent lights
- various kind of electric cables, earthing equipment etc.
- reversers, couplers, current reducers, adaptors, voltmeter etc.
Fire fighting and smoke diving:
- handheld fire extinguishers (carbon dioxide, dry powder), bucket fire extinguisher
- fire blanket, fire protection gloves
- extension ladder
- compressed air apparata for smoke diving, masks, regulators, dividers etc.
- smoke diving monitoring chart, several additional air containers
- hand torches, chargers, searching light, floodlights, radios for smoke diving
- smoke diving ropes, hose brackets, sport drinks, water
- ventilator (or a turbo fan; for over-pressurizing an area/building) with accessories
First aid & first response
- monitoring defibrillator, razorblade, cloth scissors
- oxygen container, regulator, oxygen masks, suction unit
- breathing mouthpiece, bag resuscitator with reservoir bag, various masks
- laryngoscope with light and various blades, various endotracheal tubes, Magill’s forceps
- vacuum mattress, vacuum splints, pump for vacuum splints, blanket
- stretcher, backboard, scoopsaver
- blood glucose tester, blood pressure meter, stethoscope
- penlight, tapes, various kind of bandages, binders, tapes, gauzes, trigonum
- sick report blankets
- infusion lines, infusion liquids, glucose liquid, sodium bicarbonate solution
- canules, stasis etc.
- acetylsalicylic acid, active carbon, isosorbide nitrate
High places & roofs:
- carabiners, ropes, knives, descenders, rescue harnesses, rope clamps
- pulleys, belay device, gear slings, etc.
- rescue cushion
Rescue diving:
- light and heavy underclothes, diving suits, SCUBA apparata, full-face diving masks, fins
- knives, weight belts, depth meters, diving computers, diving rope reels, diving compasses
- ultrasonic diving phones, diving phones, phone cables
- buoyancy vests, torches, safety ropes, hauling sack
- submersible welding equipment, welding mask for diver
- surface air equipment, air hoses etc.
- binoculars, life jackets, life ring, rescue board, ropes, ladders
Routing:
- digital map system, digital driving/navigation system
- handheld maps, special maps for underground tunnels, map of hydrants etc.
- handbooks of fire detectors, charts of various buildings and sites etc.
Tools:
- Universal keys and tools for elevators, fire detectors, fire hydrants
- keys and tools for windows, natural gas lines, gas bottles etc.
- various tools and drills for breaking locks and doors
- various general tools: screwdrivers, various kind of gavels, nails, iron wire
- combined pliers, adjustable wrenches, plate shears, open-end wrenches, socket wrenches
- pipe tongs, power tongs, saw, metal saw, hex wrenches, torx drivers, cutting pliers, etc.
- chain saws, spare chaings & Chainsaw spare parts, gasoline, logger’s helmet, breaking bar & impact bar
- electric chain saw, chipping hammer, drills, cable ties, nails, iron wires
- angle grinders, clearing saw, paving breaker, nailgun
- ice auger, ice saw, strainer, hammers, shovel, crow bar, iron bars, axes, street brushes, swab
- measuring tape, duct tape, plastic bags, wedges, spray paint for marking, marking chalks
- goggles, hearing protectors, gauntlets, dust filter masks, chemical protection masks
- various kinds of submersible pumps, hoses
- starting cables
Traffic accidents & rescue:
- high visibility traffic reflecting vests, traffic cones
- air compressor and hydraulic pump units, high pressure air hoses
- pressurized air tools: drills, air pistol, tire filling nozzles
- various types of pneumatic lifting bags
- various hydraulic cutters, several rescue chain packages
- various types of heavy hydraulic spreaders
- several telescopic ram spreaders, hydraulic jacks etc.
- pressurized air container, regulators
- air bag protection package, stabilization blocks, struts
- earthing tools for subway, electric train & tram etc. systems
- traffic sign "road closed", warning triangle, barrier tape
- (a heavy built-in) winch, pulley blocks, shackles, belts, straps, various types of slings, ratches, tackles
- a self-contained ultra-thermal cutting pack (oxygen, regulator, cables, rods, etc.)
- protective gloves, welding mask, etc.
Various:
- multipurpose cart
- box for animal transportation, net, etc.
- timber
- overalls, spare boots, etc.
General information on the Finnish rescue units can be found in Finnish, for example, at the homepages of Helsinki Rescue Department[2] and the Ministry of Interiors[3].
In 2007, the truck in the picture was replaced with a newer one shown in picture [1]. The equipment in the rescue unit has been slightly changed.Chainsaw spare parts.

Replacement Briggs Air Filter 491588

Product FeaturesReplaces Briggs & Stratton OEM #S 491588 491588S 399959 For 3 & 5 HP Horizontal Engines 130200 Series Starting At Type #2915. For All 3.5 - 6 HP Quantum Engines 5-1/4-inch L x 4-1/2-inch W x 13/16-inch H
--------------------------------------------------------------------------------Product DetailsShipping Weight: 2.9 ounces (View shipping rates and policies) Shipping: This item is also available for shipping to select countries outside the U.S. ASIN: B0009XANA0 Item model number: 30-710 Average Customer Review: 4.7 out of 5 stars See all reviews (3 customer reviews) 3 Reviews 5 star: (2) 4 star: (1) 3 star: (0) 2 star: (0) 1 star: (0)
Amazon Bestsellers Rank: #2,648 in Patio, Lawn & Garden (See Top 100 in Patio, Lawn & Garden)#9 in Home Improvement > Mowers & Outdoor Power > Outdoor Power Accessories > Mower Parts & Accessories > Mower Parts > Filters
--------------------------------------------------------------------------------
Product DescriptionProduct Description- 5-1/2 inch length - 4-1/2 inch width - 13/16 inch height - Blue seal - Fits 3 and 5 HP horizontal engines - 130200 series starting at type 2915 - Fits all 3.5 to 6 HP Quantum engines - OEM B&S numbers 399959, 491588, 491588S, 5043 - OEM Honda numbers 17211-ZL8-000, 17211-ZL8-003 - OEM John Deere numbers AM116236, PT15853

Honda GX160 Engine Parts with Diagram

GX160 parts
No
Description
Replaces Honda Part No
Order
1
Starter Assembly., NEW STYLE
28400-ZH8-013ZA
Part No: 31-052
Internet Price: $64.95
2
Starter Spring
28442-ZH8-003
Part No: 43-425
Internet Price: $9.95
3
Starter Pulley
28420-ZH8-013
Part No: 28420-ZH8-013
Internet Price: $28.95
4
Starter Pawl Spring
28443-ZH8-003
Part No: 28443-ZH8-003
Internet Price: $3.95
5
Starter Pawl
28422-ZH8-013
Part No: 28422-ZH8-013
Internet Price: $5.95
6
Starter Pawl Retainer
28433-ZH8-003
Part No: 28433-ZH8-003
Internet Price: $8.95
7
Starter Center Screw
90003-ZH8-003
Part No: 90003-ZH8-003
Internet Price: $4.95
8
Switch, On/Off
36100-ZE1-015
Part No: 33-013
Internet Price: $10.95
9
Blower Housing
19610-ZE1-000ZA
Part No: 19610-ZE1-000ZA
No Longer AvailableReplaced by 19610-ZE1-000ZP
10
Air Filter
17211-ZE1-000
Part No: 30-346
Internet Price: $8.95
11
Starter Cup
28451-ZH8-003
Part No: 28451-ZH8-003
Internet Price: $20.95
12
Fuel Tank Joint
16955-ZE1-000
Part No: 07-393
Internet Price: $6.95
13
Fuel Cap, Plastic
17620-ZE7-000
Part No: 07-318
Internet Price: $9.95
14
Fuel Strainer
17672-ZE2-W01
Part No: 07-118
Internet Price: $3.95
15
Fuel Tank
17510-ZE1-020ZA
Part No: 07-600
Internet Price: $30.95
16
Fuel Line
95001-45200-40S
Part No: 07-060
Internet Price: $2.95
17
Diode Assembly.
34150-ZH7-003
Part No: 34150-ZH7-003
No Longer AvailableReplaced by 34150-ZH7-013
18
Ball Bearing, Crankshaft
96100-62050-00 91001-ZF1-003
Part No: 96100-62050-00
Internet Price: $16.95
19
Oil Level Switch
15510-ZE1-033
Part No: 15510-ZE1-033
Internet Price: $42.95
20
Sump Cover Gasket
11381-ZH8-801
Part No: 50-450
Internet Price: $5.95
21
Oil Cap and Indicator
15600-ZE1-003
Part No: 49-196
Internet Price: $6.95
22
Oil Seal, PTO
91202-883-005
Part No: 49-208
Internet Price: $5.95
23
Oil Cap
15600-ZE1-003
Part No: 50-451
Internet Price: $5.95
24
Connecting Rod (Std)
13200-ZE1-010
Part No: 36-141
Internet Price: $21.95
25
Piston (Std)
13101-ZF7-010
Part No: 36-243
Internet Price: $54.95
26
Ring Set (Std)
13010-ZF1-023
Part No: 36-043
Internet Price: $17.95
27
Lower Cylinder Shield
19630-ZH8-000
Part No: 19630-ZH8-000
Internet Price: $11.95
28
Muffler Gasket
18381-ZH6-800
Part No: 50-425
Internet Price: $5.95
29
Muffler Shield
18320-ZF1-H01
Part No: 35-041
Internet Price: $14.95
30
Muffler Assembly.
18310-ZF1-000
Part No: 35-038
Internet Price: $33.95
31
Rocker Cover
12310-ZE1-020
Part No: 12310-ZE1-020
Internet Price: $11.95
32
Rocker Cover Gasket
12391-ZE1-000
Part No: 50-432
Internet Price: $5.95
33
Carb. Insulator Gasket
16212-ZH8-800
Part No: 49-183
Internet Price: $2.95
34
Carb. Gasket
16221-ZH8-801
Part No: 49-190
Internet Price: $1.95
35
Choke Lever
16610-ZE1-000
Part No: 16610-ZE1-000
Internet Price: $6.95
36
Air Cleaner Gasket
16220-ZE1-020
Part No: 49-185
Internet Price: $7.95
37
Ignition Coil
30500-ZE1-033
Part No: 30500-ZE1-033
No Longer AvailableReplaced by 30500-ZE1-063
38
Intake Valve
14711-ZF1-000
Part No: 36-521
Internet Price: $13.95
39
Exhaust Valve
14721-ZF1-000
Part No: 36-522
Internet Price: $22.95
40
Cylinder Head Gasket
12251-ZF1-000
Part No: 50-556
Internet Price: $14.95
41
Long Head Assembly.
--
Part No: 36-530
Internet Price: $95.95
42
Carb Assembly.
16100-ZH8-W50
Part No: 50-638
Internet Price: $57.95
43
Oil Seal, MAG
91202-883-005
Part No: 49-208
Internet Price: $5.95
Honda's commitment to creating products that improve the quality of people's lives goes well beyond automobiles and motorcycles. Since 1953, Honda has manufactured over 40 million power products worldwide and continues as a leader in the development of low-emission, fuel efficient, environmentally friendly 4-stroke engines for use in outboard motors, generators, ,GX160 parts,water pumps, lawn mowers and many other power equipment applications. This leadership in power equipment design and engineering was clearly evidenced by Honda's commitment to have most of its worldwide general purpose engines meet the U.S. Environmental Protection Agency's 2006 emission levels by late 2001.

Share of Chinese auto-parts in Indian mkt to reach $6.85 bn

NEW DELHI: The share of china auto parts imported from China in the domestic market is expected to increase by 12-fold and would reach to USD 6.85 billion (over Rs 30,000 crore) by 2012-13, industry chamber Ficci said in a report.
In 2008-09, China's share in the domestic auto component market stood at USD 544.6 million (about Rs 2,500 crore).
"Import of auto parts from China have been rising at an alarming rate of 88 per cent annually...with this growth rate, Chinese share in our domestic china auto parts market would increase from 2.7 per cent to 15.6 per cent by 2012-13," it said.
The total import of china auto parts have increased to Rs 27,355 crore in 2008-09 from Rs 9,604 crore in 2004-05.
The report said that if the current rate of growth in the import continues, the share of the imported products in the domestic market will increase to 42 per cent by 2013-14.
Currently, the share of imported china auto parts across the globe in the local market is about 33 per cent.
It said that the share of the imports would increase further on account of reduction of customs duty on several auto parts under free trade pacts with the ASEAN and South Korea.
In order to ensure orderly development of domestic auto- component industry in view of the growing challenges from various free trade pacts, Ficci asked the government to give fiscal incentives to promote production of critical and high value added components.
It also sought creation funds - Automotive Development Fund (ADF) and Industrial Adjustment Fund (IAF)- on the lines of similar funds given in Malaysia.

konw about china motocross

During the early 1980s, Japanese factories presided over a technology boom in motocross. The typical two-stroke air-cooled, twin-shock rear suspension machines gave way to machines that were water-cooled and fitted with monoshock rear suspension. By the 1990s, increasingly stringent environmental laws in California forced manufacturers to develop environmentally friendly four-stroke technology.
At the turn of the century, all the major manufacturers have begun competing with four-stroke machines. European firms also experienced a resurgence with Husqvarna, Husaberg and KTM winning world championships with four-stroke machinery.
The sport evolved with sub-disciplines such as stadium events known as supercross and arenacross held in indoor arenas. Freestyle motocross (FMX) events where riders are judged on their jumping and aerial acrobatic skills have gained popularity, as well as supermoto, where motocross machines race on both tarmac and off road. Vintage motocross events have also become popular with riders competing on bikes usually pre-dating the 1975 model year.
china motocross products. Buy china motocross gear from global china motocross gear manufacturers, suppliers, china motocross exporters。

Magna Seating and Hollingsworth Logistics form JV to supply Volkswagen Chattanooga

AURORA, ON, April 5 /PRNewswire-FirstCall/ - Magna Seating, an operating group of Magna International, and Hollingsworth Logistics, a leading provider of industrial supply chain management, announced they have formed a joint venture to supply Volkswagen Group of America (VWGoA) with complete seat systems for the mid-size sedan to be built at Volkswagen's new Chattanooga, Tennessee, assembly facility.
"This partnership is a great sign of things to come for everyone involved," said Frank Fischer, President and CEO for Volkswagen in Chattanooga. "We are pleased that a minority-owned joint venture will be a part of our supplier team for the all-new mid-size sedan and that the addition of 120 jobs will continue to strengthen the economy here in the Tennessee Valley," Fischer said.
The joint-venture company, Chattanooga Seating Systems (CSS), is 51 percent owned by Hollingsworth Logistics and 49 percent Magna Seating. The JV combines Hollingsworth's expertise in sequencing and delivery of products and Magna Seating's proven expertise in the design, engineering and manufacture of automotive seating systems. CSS will be a minority supplier to Volkswagen by virtue of Hollingsworth's status as a Native American-owned company.
Steven Barr, Owner and CEO of Hollingsworth Logistics Group stated, "We are very proud of our long-standing relationship with Magna and we look forward to adding CSS to our two existing joint-ventures. We have been partners with Magna for the past ten years and look forward to working together to provide Volkswagen with outstanding service and a best-in-class product."
"This joint venture strategically positions both companies for continued growth in North America," said Joe Pittel, President of Magna Seating. "We look forward to working together with Hollingsworth, leveraging each other's strengths and delivering innovative seating solutions to Volkswagen."
As a newly formed company in Tennessee, Chattanooga Seating Systems worked closely with city, county and state government officials to take advantage of business-friendly incentives being offered to many of the suppliers establishing new operations in support of VWGoA's new facility.
"We're pleased to join Volkswagen in welcoming Chattanooga Seating Systems as the second major auto supplier to set up shop in Hamilton County to support the new assembly plant," said Hamilton County Mayor Claude Ramsey.
About Hollingsworth Logistics
Hollingsworth Logistics Group is a certified minority Native American company which has provided logistics support to the automotive industry for over 25 years. Our core strengths include the analysis of material flow; warehousing; assembling and modifying subassembly components; packaging and kitting; sequencing and metered flow facilitation; parts distribution; reverse logistics including core evaluation and disposition, and both inbound and outbound transportation management.
About Magna Seating
Magna Seating is an innovative leader in the development and manufacture of high-quality complete seat solutions and seat mechanisms for the global automotive industry. Our capabilities range from consumer and market research, full concept development, design and engineering, testing and validation to world-class manufacturing of seating components and complete seat assemblies.
About Magna International
Magna International (http://www.magna.com/) is the most diversified global automotive supplier. We design, develop and manufacture technologically advanced automotive systems, assemblies, modules and components, and engineer and assemble complete vehicles, primarily for sale to original equipment manufacturers (OEMs) of cars and light trucks. Our capabilities include the design, engineering, testing and manufacture of automotive interior systems; seating systems; closure systems; body and chassis systems; vision systems; electronic systems; exterior systems; powertrain systems; roof systems; hybrid and electric vehicles/systems as well as complete vehicle engineering and assembly.
We have approximately 72,500 employees in 238 manufacturing operations and 79 product development and engineering centers in 25 countries.
Forward-Looking Statements
The previous discussion contains statements that constitute "forward-looking statements" within the meaning of applicable securities legislation, including, but not limited to, statements relating to Magna's expected consolidated sales, based on expected light vehicle production in North America and Europe, North American and European average dollar content per vehicle, complete vehicle assembly sales and fixed asset expenditures. The forward-looking information in this Press Release is presented for the purpose of providing information about management's current expectations and plans and such information may not be appropriate for other purposes. Forward-looking statements may include financial and other projections, as well as statements regarding our future plans, objectives or economic performance, or the assumptions underlying any of the foregoing, and other statements that are not recitations of historical fact. We use words such as "may", "would", "could", "should", "will", "likely", "expect", "anticipate", "believe", "intend", "plan", "forecast", "outlook", "project", "estimate" and similar expressions suggesting future outcomes or events to identify forward-looking statements. Any such forward-looking statements are based on information currently available to us, and are based on assumptions and analyses made by us in light of our experience and our perception of historical trends, current conditions and expected future developments, as well as other factors we believe are appropriate in the circumstances. However, whether actual results and developments will conform with our expectations and predictions is subject to a number of risks, assumptions and uncertainties, many of which are beyond our control, and the effects of which can be difficult to predict, including, without limitation: the potential for a slower than anticipated economic recovery or a deterioration of economic conditions; low production volumes and sales levels; the financial condition and credit worthiness of some of our OEM customers, including the potential that such customers may not make, or may seek to delay or reduce, payments owed to us; the financial condition of some of our suppliers and the risk of their insolvency, bankruptcy or financial restructuring; the highly competitive nature of the automotive parts supply business; our dependence on outsourcing by our customers; the termination or non renewal by our customers of any material contracts; our ability to identify and successfully exploit shifts in technology; restructuring, downsizing and/or other significant non-recurring costs; impairment charges; our ability to successfully grow our sales to nontraditional customers; unfavourable product or customer mix; risks of conducting business in foreign countries, including China, India, Brazil, Russia and other developing markets; our ability to quickly shift our manufacturing footprint to take advantage of lower cost manufacturing opportunities; disruptions in the capital and credit markets; fluctuations in relative currency values; our ability to successfully identify, complete and integrate acquisitions; pricing pressures, including our ability to offset price concessions demanded by our customers; warranty and recall costs; product liability claims in excess of our insurance coverage; changes in our mix of earnings between jurisdictions with lower tax rates and those with higher tax rates, as well as our ability to fully benefit tax losses; other potential tax exposures; legal claims against us; work stoppages and labour relations disputes; changes in laws and governmental regulations; costs associated with compliance with environmental laws and regulations; potential conflicts of interest involving our indirect controlling shareholder, the Stronach Trust; and other factors set out in our Annual Information Form filed with securities commissions in Canada and our annual report on Form 40-F filed with the United States Securities and Exchange Commission, and subsequent filings. In evaluating forward-looking statements, we caution readers not to place undue reliance on any forward-looking statements and readers should specifically China oil pump consider the various factors which could cause actual events or results to differ materially from those indicated by such forward-looking statements. Unless otherwise required by applicable securities laws, we do not intend, nor do we undertake any obligation, to update or revise any forward-looking statements to reflect subsequent information, events, results or circumstances or otherwise.